VEGA LAUNCH COMPLEX (or ELV) For Orbiter 2010 (not for the new Orbiter 2016)This Launch Complex for Vega rockets is located at the Space Flight Center of Kourou, in French Guyana.
This add-on is an update for the must have Space Center of Kourou by Papyref and Mustard.
It is necessary and essential to first install the " Kourou CSG global - part1 and part2 " add-on here :
Kourou CSG global part1Kourou CSG global part2This Launch Zone was built in 1973 for launching the Europa 2 rocket.
It was reconverted and adapted for the Ariane 1 rockets and was renamed as ELA-1 for "Ensemble de Lancement Ariane 1" (in French).
This complex was closed in 1989 and the Tower destroyed in 1991. It remainded only the concrete foundation block and the water reservoir.
During the late of the years 2000 a major modification is made and a new Assembly Tower is built. It was renamed as ELV for launching Vega Rockets.
The first launch of this new rocket has occurred on February 13th, 2012.
Installation :Just unzip the "zip" file in the root folder of your Orbiter.
Some files will be overwritten (don't worry) :
- Kourou_CSG.cfg
- ariane1.ini - ariane2.ini - ariane3.ini
- zl1tower.ini - zl1tour.msh
- R4D.msh
- Earth_6_w4785_n0460.dds
Recommended add-on :You can use this add-on alone, but it was made especially for the Vega rocket.
You have a Vega rocket modeled by Xosema on OrbitHangar at this address :
http://www.orbithangar.com/searchid.php?ID=2546Note :The Vega rocket is too low with this new launching complex.
A file from Xosema's add-on needs to be modified :
Edit the ...\\Config\\Vega\\Vega.ini file and modify COG=3 to COG=8.61.
Compatible SDKs :- Spacecraft 3 & 4 (by Vinka) provided in this add-on.
- Multistage2015 (by Fred18) provided in this add-on.
- D3D9 Graphic Client (by Jarmonik) no provided (optional).
Many thanks to them !!!
Plead read the explicative Manual (in French and in English), located in the ... \\ Doc \\ ELV folder.Type: Bases Filename: Kourou-CSG_ELV.zip Size: 49MB News posted by ForumBot from Francophone addons web siteENSEMBLE DE LANCEMENT VÉGA (ou ELV) Pour Orbiter 2010 (non adapté pour Orbiter 2016)Cet Ensemble de Lancement pour les fusées Véga est situé sur la base de Kourou en Guyane française.
Cet add-on est une mise à jour pour l'incontournable Centre Spatial Guyanais de Kourou de Papyref et Mustard.
Il est donc indispensable d'installer en premier lieu " Kourou CSG global - part1 et part2 " que vous se trouverez ici :
Kourou CSG global part1Kourou CSG global part2Cet Ensemble de Lancement a été construit en 1973 pour le lancement des fusées Europa 2.
Il sera modifié en 1975 pour le lancement des fusées Ariane 1 et prend l'appellation ELA-1 pour Ensemble de Lancement Ariane 1.
Il est abandonné en 1989, et la Tour est détruite en 1991. Il ne reste plus que le massif en béton et le château d'eau.
A la fin des années 2000, le pas de tir est entièrement remanié et une nouvelle Tour est reconstruite.
Il est rebaptisé ELV et va accueillir le nouveau lanceur Véga dont le premier tir a lieu le 13 février 2012.
Installation :Dézippez directement le fichier "zip" dans le dossier-racine de votre Orbiter.
Certains fichiers seront recopiés/écrasés (pas d'inqiétude) :
- Kourou_CSG.cfg
- ariane1.ini - ariane2.ini - ariane3.ini
- zl1tower.ini - zl1tour.msh
- R4D.msh
- Earth_6_w4785_n0460.dds
Add-on conseillé :Vous pouvez utiliser cet add-on seul, mais celui-ci a été réalisé tout particulièrement pour la fusée Véga.
Vous trouverez une fusée Véga modélisée par Xosema sur OrbitHangar à cette adresse :
http://www.orbithangar.com/searchid.php?ID=2546Remarque :Cette fusée Véga va se trouver un peu trop basse par rapport à la plateforme de lancement.
Une modification très simple d'un fichier de l'add-on de Xosema doit être effectuée :
Éditez le fichier ...\\Config\\Vega\\Vega.ini et modifiez COG=3 en COG=8.61.
SDK Compatibilité :- Spacecraft 3 & 4 (de Vinka) fourni dans cet add-on.
- Multistage2015 (de Fred18) fourni dans cet add-on.
- Client Graphique D3D9 (de Jarmonik) non fourni (optionnel).
Un grand merci à eux !!!
Siouplé : lisez le Manuel explicatif (disponible en français et en anglais) qui se trouve dans le dossier ...\\Doc\\ELV.Type: Bases Nom de fichier: Kourou-CSG_ELV.zip Taille: 49MB Annonce postée par ForumBot depuis le site des Addons FrancophoneGalerie de l'addon